Electric Heat Kit Installation Manual
Table Of Contents
- Electric Heat Kit
- Table of Contents
- CHECK LIST AFTER INSTALLATION
- Dimensions
- 1. Electric Heat Kit Models
- 2. Electric Heat Kit Accessories
- 3. Safety precautions
- 4. Installing the Electric Heat Kit
- 4.1 Read the safety precautions section of the Multi-Position Air Handler before installing the electric heat option.
- 4.2 Setting proper external static pressure.
- 4.3 Enabling Electric Heat
- 4.4 Operation Mode
- 4.5 Attaching the enclosure to the Air Handler
- 4.6 Proper Support in the Horizontal Position for the Multi-Position Air Handler with Electric Heat Kit:
- 4.7 Rotating circuit breaker orientation for Horizontal Left Installations:
- 5. Electrical Schematics
4.4 Operation Mode
PVFY
-A·NAMU-E, PVA-A·AA4, and MVZ-A·AA4 Models:
The operation of the electric heat kit can be set for different modes, Comfort or Energy-Save mode. PVFY-A·NAMU-E
models will be set be SW3-4 and SW3-2 according to below. PVA-A·AA4 and MVZ-A·AA4 models will be set by mode 23
and mode 11.
PVFY-A·NAMU-E models
(Installed with PUHY
, PURY, PQHY or PQRY)
PVFY-A·NAMU-E models
(Installed with PUMY)
MVZ-A·AA4 and PVA-A·AA4 models
Electric Heat Kit
Specifications are subject to change without notice. 16 © 2018 Mitsubishi Electric US, Inc.