Electric Heat Kit Installation Manual
Table Of Contents
- Electric Heat Kit
- Table of Contents
- CHECK LIST AFTER INSTALLATION
- Dimensions
- 1. Electric Heat Kit Models
- 2. Electric Heat Kit Accessories
- 3. Safety precautions
- 4. Installing the Electric Heat Kit
- 4.1 Read the safety precautions section of the Multi-Position Air Handler before installing the electric heat option.
- 4.2 Setting proper external static pressure.
- 4.3 Enabling Electric Heat
- 4.4 Operation Mode
- 4.5 Attaching the enclosure to the Air Handler
- 4.6 Proper Support in the Horizontal Position for the Multi-Position Air Handler with Electric Heat Kit:
- 4.7 Rotating circuit breaker orientation for Horizontal Left Installations:
- 5. Electrical Schematics
CAUTION
•
Do not install in any place exposed to flammable gas leakage. Flammable gases that accumulate
around the Electric Heat Kit may cause an explosion.
• Do not use in any special environment. Using in any place exposed to oil (including machining oil),
steam and sulfuric gas may deteriorate the performance significantly or give damage to the component
parts. Do not install in any place at a temperature of more than 104° F or less than 32° F or exposed to
direct sunlight.
• Do not install in any place where acidic or alkaline solution or special spays are often used. Doing so
may cause an electric shock or malfunction.
• Wire so that it does not receive any tension. Tension may cause wire breakage, heating or fire.
• Do not install in an environment where moisture is condensed into water. Doing so may cause electric
shock or malfunction.
• Do not wash with water. Doing so may cause electric shock or malfunction.
Electric Heat Kit
Specifications are subject to change without notice. 10 © 2018 Mitsubishi Electric US, Inc.