User`s guide

Hardware
Mitsubishi Electric, MA00758A 13
Technical Data E1032
Front panel, W x H x D 202 x 187 x 6 mm
Mounting depth 57 mm (157 mm including clearance)
Front panel seal IP 66
Rear panel seal IP 20
Keyboard material Membrane switch keyboard with metal domes.
Overlay film of Autotex F157 with print on reverse side.
1 million operations.
Reverse side material Powder-coated aluminum
Weight 0.95 kg
Serial port RS422/RS485 25-pin D-sub contact, chassis-mounted female with
standard locking screws 4-40 UNC.
Serial port RS232C 9-pin D-sub contact, male with standard locking screws
4-40 UNC.
Ethernet Shielded RJ 45
USB Host type A (USB 1.1), max output current 500 mA
Flash memory for
application
12 MB (incl. fonts)
Real time clock ±20 PPM + error because of ambient temperature and
supply voltage.
Total maximum error: 1 min/month at 25 °C
Temperature coefficient: 0.004 ppm/°C
2
Real time clock battery CR2450 (UL and cUL: Sanyo or Panasonic)
Minimum lifetime: 3 years
Power consumption at rated
voltage
Normal: 0.15 A
Maximum: 0.35 A
Display FSTN-LCD. 240 x 64 pixels, monocrome transflective.
LED backlight lifetime at the ambient temperature of
+25 °C: >35,000 h.
Active area of display, W x H 127.0 x 33.8 mm
Fuse Internal DC fuse, 2.0 AT, 5 x 20 mm
Power supply +24V DC (20 - 30V DC). Power supply connector.
CE: The power supply must conform with the
requirements according to IEC 60950 and IEC 61558-2-4.
UL and cUL: The power supply must conform with the
requirements for class II power supplies.
Ambient temperature Vertical installation: 0 ° to +50 °C
Horizontal installation: 0 ° to +40 °C
Storage temperature -20 ° to +70 °C
Relative humidity 5 - 85 % non-condensed