Installation manual

Appendix 4
Appendix 4-3
Operation is the same as EX1.
Loads project data.
Starts/terminates serial operation.
Performs forward serial operation
for loaded “project” jumping to the
JUMP destination designated by
its JUMP data.
Shifts to the current point
with axis motion or linear
motion
Deletes loaded project.
２．SAMPLE PROGRAM：ＥＸ２ (VisualBASIC Version)
Sample program “ＥＸ２” loads project data on the basis of EＸ1 and is added a serial operation
function. However, this function is created only in VisualBASIC development environment.
Installed to the following directory path:
\winpapci\src\sample\VB\EX2
”\winpapci” stands for the directory designation of “winpapci” for installation.
（１）Operation
Screen below shown when “EX2.exe” is activated.