Installation manual

Chapter 5 Program Development & Processing Conditions

（３）Structural Member Alignment Alteration

Structural member alignment has to be set for 2 bytes. (default is 8 bytes)

<Setting Method> Choose “Setting…” inside “Project” of the menu bar, then choose

“code creation” in the C/C++ category, then, change the structural

member alignment for 2 bytes.

（４）Needed DLL file for processing

To process the application program the following DLL is needed to be located in the

designated place:

Windows2000/NT： \WINNT\SYSTEM32,

Windows XP： \WINDOWS\SYSTEM32.

(There is no need to operate any linking or such.)

PAPCI.DLL ････ The file keeping the PA library processing module.