Installation manual

Chapter 7 Library Reference
7-
36
ERROR LIST (in common)
ERR_PLY_KEY -1249 Wrong designated number when in Key
acquisition
ERR_NON_KEY -1250 There is no designated ID attribution in
teach data designated by Key
ERR_NON_CID -1251 Designated teach point has no JUMP data.
ERR_JMP_SET -1252 Teach data designated by Key does not have
its number JUMP information.
ERR_NON_IDN -1253 Teach point designated by ID attribution has
no JUMP information.
ERR_JMP_NUM -1254 Unable to find JUMP information designated
by teach point attribution.
ERR_JMP_ATR -1255 Wrong designated parameter when in JUMP
data acquisition/setting
ERR_KEY_ATR -1256 Wrong designated parameter when in JUMP
data acquisition/setting
ERR_SOC_TST -1300 Socket generation failure
ERR_BND_TST -1311 Failed to bind socket and address
ERR_LSN_TST -1312 Listening failure
ERR_APT_TST -1313 Accepting failure
ERR_SOC_SND -1314 Socket generation failure
ERR_SOC_BLK -1315 Not available
ERR_SOC_CLT -1316 Too many clients connected
ERR_PRM_DEV -1350 Parameter motion velocity is exceeding
velocity limit value. Parameter alteration is
invalid.