Install guide

For Orders, Call: 1-800-233-6261 | For Systems Sales And Support, Call 1-800-234-7971 | www.adilink.com
180
CCTV
Additional CCTV Products
Back UPS
2G-ES Series
2G-RS Series
Provides power protection for home, home office, and
security systems
Battery Backup
Solutions from 350VA to 1500VA
Safe systems shutdown software and USB connectivity
Automatic Voltage Regulation (RS Series)
$75,000 (ES Series) or $150,000 (RS Series)
Equipment Protection Policy
•
•
•
•
•
•
Coaxial Video Surge Protection
DK-IBNC28
Protects individual fixed camera
Use when no ground Is available
Surges dissipated through shield to ground
BNC connected to camera output
10 year limited warranty
Available for Coax and Coaxitron video (DK-IBNC68)
•
•
•
•
•
•
PTZ Camera Surge Protection
DK-DP4P
Individual Pan-Tilt-Zoom camera protection
Typically installs in camera housing or pole base
One product protects Power, Data and Video circuits
BNC Video protection
DK-DP4PTPV
Twisted Pair Video protection
DK-DP4PBP
Passive Balun included, eliminates need for seperate
converter
•
•
•
•
•
•
16-Channel DVR Surge Protector & UPS
DK-DRP16
Complete Power, Video and CAT5e surge protection
UPS keeps DVR running through temporary power loss
Field-Replaceable Battery
2.8V let-through on coax video - maximum protection
with no signal loss
Surge protected RJ-45 CAT5e jack
Dry contacts for remote notification
DK-DRP16B
Includes 16-channel Passive Balun, eliminating need for
seperate converter
•
•
•
•
•
•
•
IP Video Camera Surge Protector
DK-MRJPOE
For Power over Ethernet devices
Protects 5V data and 24/48V power pairs
RJ-45 In/Out connection, external grounding connector
Gigabit Ethernet data rate
Can be used at camera, midspan, hub, etc.
DK-DTKRM12POE
2U, 12-channel rack mount PoE protection
DK-RM16C5
2U, 16-channel rack mount surge protected patch panel
•
•
•
•
•
•
•
Fixed Camera Surge Protection
DK-PVPB
Individual fixed camera protection
One product protects camera power and video circuits
2.8V coax video let-through voltage for best protection
Typically installs in camera housing or pole base
DK-PVPC
Coaxitron Video protection, 6.8V clamping
DK-PVPTPV
Twisted Pair Video protection, 6.8V clamping
•
•
•
•
•
•
Coax Video Surge Protection
DK-DTK4VP
Protects four video channels with one product
Ideal for 4- or 8-camera CCTV installations
2.8V let-through provides maximum protection
BNC Coax In/Out
DK-RM16NM
2U,16-channel rack mount coax video protection
DK-RM16NMC
Protects Coaxitron PTZ cameras
6.8V clamping
•
•
•
•
•
•
•
Controller Keypad
KA-KTD405
Designed to manage an entire CCTV system
Control & program up to 512 cameras,
64 multiplexers, 64 recorders & 64 monitors
Zone system partitioning
3-axis joystick
•
•
•
•
•
Crosspoint 32
KA-KTD34816A
16 inputs x 4 outputs, expandable to 32 x 8
Perfect for mid-sized CCTV installs
Program sequence tours, tilting and dwell times
32 programmable alarm inputs
Looping video inputs
•
•
•
•
•
Video Power Supplies
0H-HPTV2404E
4 outputs @ 4.0A total
Converts 110VAC to 24VAC
Full LED diagnostics
3A auto fuses per output with 5A main fuse
Replace “E” with “CBE” for 2.5A circuit breakers
0H-HPTV2408E
8 outputs @ 4.0A total
0H-HPTV2416E
16 outputs @ 8.0A total
•
•
•
•
•
•
•
Two Video Cameras on One Coax Cable
FM-TVPRVP20
Two video signals on one coax or UTP cable
Add and extra camera without additional cabling
Full Frame realtime video on both channels
The A channel allows two way PTZ control
Can use existing 24VAC camera power
Corrects for cable slope loss on the B channel
A channel can be used for video or RS422/485
Video can run in both directions simultaniously
Full line resolution in Color or B/W
•
•
•
•
•
•
•
•
•
FMSystems
Ground Loop Blocker Amplifier
FM-GB60
Eliminates Ground Loop interference
Restore picture quality on long cable runs
Up to 5000 foot operation
4 independant video channels
For CCTV, NTSC,and Pal video standards
Independant level and sharpness controls
24VDC power supply included
•
•
•
•
•
•
•
FMSystems