Instruction manual

1. Introduction
Mitsubishi DX-PC25U is viewing software designed for the Digital Video Recorder (DVR) DX-TL2500U. This
software enables you to connect and communicated via a network with the DVR and also to playback saved
images (saved on CFC or CD from DVR) on your PC
View live or playback video of all cameras connected to the recorder.
Search for a specific video Date&Time, Alarm or Recording Index.
Save a still picture as a bitmap or JPEG format. It is also possible to convert the still pictures into
AVI format.
Control functions of the recorder and PTZ camera remotely.
Change the setting of the recorder via network.
1.1 Product Features
View live images across a network in full or split screen mode.
Control PTZ cameras
View recorded images across a network with split screen modes, Search via Fast Forward, Rewind,
Time and Date or Alarm List.
Copy images to the user’s PC.
Receive alarms notice
Control and SETUP menu of DX-TL2500U from a network.
1.2 System requirements
- IBM PC/AT-compatible with Intel Pentium series or Intel Celeron series CPU (500MHz or faster)
- Microsoft Windows 98SE, Windows 2000, Windows Me or Windows XP
- RAM: 256MB or more
- Display resolution: 1024 pixels x 768 lines (XGA) or more (recommended). Use a video card and
monitor capable of displaying 32,000 or more colors.
- Free HD space: 200MB or more
- SCSI adapter : Adaptec AHA-2940 Series, SlimSCSI etc. compatible with
WINASPI32 and SCSI-2 (when SCSI-connected peripheral devices are used) Under
Windows 2000, WinASPI must be installed in advance for the playback of SCSI-connected devices.
Please read the instruction manual for Adaptec SCSI board for the installation of WinASPI.
- Sound adapter : Windows-compatible type; SoundBlaster etc.
- Installed browser: MS Internet Explorer 5.01 Service Pack 2 or later
- Network interface (10Base-T) card compatible with the environment described above
Note: Operations are not guaranteed for all environments confirming to the above description.
MITSUBISHI ELECTRIC CORP. - 6 -