Instruction manual

Video Window
Name and IP address of connected recorder is showed.
Zoom control buttons
Focus control buttons
Iris control buttons
Camera Number Tilt Up button
Pan left button
n controls
Pan Right button Interval Time (ms)
amera Number : Choose the camera you want to control.
camera angle in horizontal direction.
Panning ntal + vertical
h
) Zoom control
: To start zooming out, press this button.
) Focus control
: To focus the lens on one step near side, press this button.
ton.
) Iris control
: To close the iris, press this button. Then the iris level becomes 1 step lower.
matically.
) Preset position control
osition, choose a position number and press Resister button.
ess Jump button.
Preset positio
Tilt Down button
C
Panning : Click or button to change the
Tilting : Click or button to move camera to vertical direction.
+ Tilting : Click or or or button to move camera to horizo
directions (PAN & Tilt). en you find any problem at the one of the direction, W
please change the interval time between PAN command and Tilt command.
(1
- Wide button
- Tele button : To start zooming in, press this button.
- Stop button : To stop zooming, press this button.
(2
- Near button
- Far button : To focus the lens on one step far side, press this button.
- Auto button : To activate Auto-Focus function of the lens, press this but
(3
- ( - ) button
- ( + ) button : To open the iris, press this button. Then the iris level becomes 1 step higher.
- AUTO button : To activate auto iris control, press this button. Then iris level is controlled auto
(4
- To register a new preset p
- To point the camera toward the desired preset position, choose a position number and pr
MITSUBISHI ELECTRIC CORP. - 15 -