ENGLISH DEUTSCH DIGITAL RECORDER RS-232 PROTOCOL MODEL DX-TL1600EM 1
ENGLISH COMMUNICATION settings / Connecting to a personal computer ■ RS-232C settings This connection can be used for remote control and recording supplementary information when the main unit is connected to a PC. @SELF IP ADDRESS 000.000.000.000Ł SUBNET MASK 000.000.000.000Ł 08-00-70-2E-3F-FF ♦ Transmission speed Example: Transmission speed is set for 4800 bps. 1. Press the SET UP button to display the
Connecting a personal computer Commandtocode Connecting to a personal computer (continued) / Command codes ♦ RS-232C terminal 1 5 2 RXD 3 TXD Transmition Contents Pin NO. Letters Transmition Contents Receiving Data 6 DSR Data Set Ready Transmission Data 7 RTS Transmission 4 DTR Data Terminal Ready 5 GND Signal Ground Pin NO. Letters RS-232C 69 Requirement CTS Transmission Clear 8 ♦ RS-232C cable Please use the following RS-232C Crossover cable to connect your personal computer to the Unit.
Command codes (continued) ENGLISH ♦ Details of the numbers #1 : When the setting of DELIMITER on RS-232C setting display is set to CR, carriage return code (0DH) will be input. If the setting is CR•LF, carriage return code (0DH) and line feed code (0AH) will be input. #2 : When the setting of DELIMITER on RS-232C setting display is set to CR, carriage return code (0DH) will be output. If the setting is CR•LF, carriage return code (0DH) and line feed code (0AH) will be output.
Command codes (continued) Commands LC #1 DP00 ST0 PI #1 #1 #1 Functions Status, when normal execute RC present time display (Same as Exits MENU display RC #2 EX #2 Stop the selected item on the menu to flash RC #2 EX #2 Acquire information on currently displayed menu and RC #2 ON LT (2) #2 ** ** ** ** (1) (2) of and (1), Move date and present time display) (2) #2 ** * ~ 69 00 : current date and time display 01 : NORMAL REC SETTING 02 : TIME DATE DISPLAY 03 : TIMER PROGRAM M-
DISPLAY MENU BASIC FUNCTIONS ** Functions RC #2 EX #2 RC #2 CF ** when execute the search (Use together the command code when execute the search) ** : 00 ~ 16 (Camera number) 00 : ALL CF? 01 ~ 16 : Camera CH(1-16) Acquire information on camera filter when execute the #1 ** search SA? Acquire information on camera number that during alarm #1 recording #2 : 00 ~ 16 (Camera number) 00 : ALL 01 ~ 16 : Camera CH(1-16) RC (1), SA (2), (3), (4), DM * * DM? #1 CH FS1 DISPLAY MO
Command codes (continued) Commands (1), SQ (2), Functions (3), * ** ** ** ** ** ** * ** ** ** ** ** ** ** ** ** ** ** ** ** ** (4), (5), (6), (8), (9), (10), Status, when normal execute Displayed sequential channel setting (7), (1) RC #2 EX #2 RC #2 EX #2 SQ (1), : Screen setting (0 ~ 2) 0 : Single screen 1 : SPLIT4 screen 2 : SPLIT9 screen (11), (12), (13), (14), (15), (16), (2) (17) #1 ~ (17) : Camera CH order (01 ~ 16, 00) (00 = invalid camera) SPLIT9 (2) : 00 ~ 01
(1), (2), (3) #1 * * * Functions * * * * * 2 : P2 : Start day of the week (0 : SUN ~ 6 : SAT) (3) : End day of the week (0 : SUN ~ 6 : SAT) (1) #2 EX #2 RC #2 DW * * * 3 : P3 (2) Acquire information on SPECIAL DW setting #1 RC : SELECTED PATTERN (1 ~ 3) 1 : P1 DW? Status, when normal execute SPECIAL DW setting (1) (1) : SELECTED PATTERN (1 ~ 3) 1 : P1 2 : P2 * * * RC #2 RC #2 (3) CA (2) * * #1 Clearing timer program * * * * (1) (1), PM TIMER PROGRAM * * (2)
Command codes (continued) Commands AS1 Functions Status, when normal execute RC Acquire information on Alarm REC interval setting #1 #2 *** AD ** RECORDING SET UP AS0 Alarm REC duration setting #1 ** *** 001 : 25F 002 : 12.5F 003 : 8.33F 004 : 6.25F 005 : 5F 006 : 4.17F 007 : 2.
BZ * Functions * (1) 1 : WRNG 2 : REMAIN EX RC #2 BZ (1) PN Acquire current power failure number #1 #2 3 : OFF Acquire information on BUZZER setting #1 RC #2 :0~3 0 : KEY FS2 Status, when normal execute BUZZER setting #1 ENGLISH REAR TERMINAL Commands * #2 * :0~3 0 : KEY 1 : WRNG RC #2 ** ** PN 2 : REMAIN 3 : OFF #2 : power failure number (01 ~ 50, 00) (00 is shown when no power failure occurs) SERVICE PT ** Acquire information on power failure list #1 ** :
Command codes (continued) Commands HE? Functions Acquire information on RECORDED PERIOD of HDD #1 Status, when normal execute RC ** ** ** ** ** ** ** (1), HE (2), (7), (8), (9), INFORMATION DEVICE RC : Start Year (4) : Start Hour : Start Minute (6) : Start Second (7) : End Day (8) : End Month (9) : End Year (10) : End Hour (12) : End Second : End Minute ARCHIVE DEVICE RC (8), (2), (9), RC (5), (12) : Start Day (2) : Start Year (4) : Start Hour (5) : Start Minute
(1), (2), ** ** ** ** ** ** *** *** (4), SEARCH SELECTION IF (5), #1 IR #1 Status, when normal execute Functions (3), (6) #1 TIME DATE SEARCH setting (1) : Day (4) : Hour ** ** *** *** (2) : Month (5) : Minute ** ** RC ** ** ENGLISH Commands TF (3) : Year (6) : Second INDEX SEARCH (forward) setting : 001 ~ 099 INDEX SEARCH (reverse) setting : 001 ~ 099 EX2 #2 #2 (given when search is completed) RC EX1 #2 #2 (given when search is completed) RC EX1 #2 #2 (given when
Command codes (continued) Commands SS OTHERS (MAIN DEVICE•HDD) SS1? #1 (ARCHIVE DEVICE) Status, when normal execute Functions Acquire the current status #1 Acquire the current status RC #2 ST00 #2 Power off RC #2 ST01 #2 during set up RC #2 ST02 #2 Power on/standby mode RC #2 ST03 #2 PB•Reverse speed search mode RC #2 ST04 #2 PB•Forward speed search mode RC #2 ST05 #2 PB•Playback mode RC #2 ST06 #2 PB•Pause mode RC #2 ST09 #2 RPB•Playback mode RC #2 ST10
#1 OTHERS (Copy device) DC BT * ** BT? #1 #1 Operation on DEVICE CHECK menu :0~1 #1 Status, when normal execute Functions Acquire the current status * ** 0 : PWR-OFF ENGLISH Commands SS2? RC #2 SS2,00 #2 Power off RC #2 SS2,01 #2 during set up RC #2 SS2,02 #2 Power on/standby mode RC #2 SS2,03 #2 PB•Reverse speed search mode (RDD only) RC #2 SS2,04 #2 PB•Forward speed search mode (RDD only) RC #2 SS2,05 #2 PB•Playback mode RC #2 SS2,06 #2 PB•Pause mode RC
Command codes (continued) SPECIAL FUNCTION MENU Commands SPECIAL FUNCTION MENU DI * * 1 : ARCHIVE #2 EX RC #2 WN ** : 00 ~ 16 ( MAX ) #2 2 : COPY Acquire warning status for serviceman #1 RC :0 ~ 2 0 : HDD WN? Status, when normal execute Functions Initializing the disk #1 , ,......
Character Search ENGLISH ■ Character Search Characters can be added to both visuals and audio using a PC when the unit is connected to a PC via the RS-232C interface. These characters will appear on screen during playback. (There is also the possibility that the characters will not be displayed.) In addition, searches of images incorporating these characters, a process called Character Search, can also be performed. Searches are carried out by designating the characters associated with a particular image.
Character Search (continued) ♦ Sample operation 1) Record characters “ABCDEF” and images simultaneously at the camera CH number 5. (On the RS-232C settings screen, set DELIMITER to “CR”.) The following are the two steps required for recording characters: 1 Set the character (or characters string) to be recorded; 2 Record the selected character(s). By using the CM command, characters which have been set once can be recorded any number of times. To record a different character set, use the CW command.
DEUTSCH DIGITALER REKORDER RS-232 PROTOKOLL MODELL DX-TL1600EM 1
Kommunikationseinstellungen / PC-Anschlüsse ■ RS-232C einstellen • Das Menü wird jetzt angezeigt. Dieser Anschluß kann für Fernsteuerung und zur Aufzeichnung zusätzlicher Informationen verwendet werden, wenn das Hauptgerät an einen Computer angeschlossen ist. @EIGENE IP-ADRESSE 000.000.000.000Ł SUB-NETZ-MASKE 000.000.000.000Ł 08-00-70-2E-3F-FF ♦ Übertragungsgeschwindigkeit Beispiel: Übertragungsgeschwindigkeit auf 4800 bps einstellen. 4.
Connecting to a personal computer PC-Anschlüsse (Fortsetzung) / Befehlscode ♦ RS-232C-Anschluß 1 5 Nr. Pol Bezeich -nung RS-232C 2 RXD Funktion Daten empfangen 3 TXD Übertragung Daten 4 DTR Endgerät betriebsbereit 5 GND Betriebserde 69 Bezeich 6 DSR Funktion Betriebsbereitschaft 7 RTS Sendeteil 8 CTS Nr. Pol -nung einschalten Sendebereitschaft ♦ RS-232C-Kabel Verwenden Sie bitte das folgende RS-232C-Anschlußkabel, um das Gerät an einen PC anzuschließen.
Befehlscode (Fortsetzung) / Zeichensuche ♦ Detaillierte Angaben #1 : Wenn auf dem Einstellungsbildschirm der RS-232C-Schnittstelle für PROTOKOLLE die Option CR gewählt wird, wird der Befehl Wagenrücklauf (0DH) eingegeben (Eingang). Bei Auswahl der Einstellung CR-LF werden die Befehle Wagenrücklauf (0DH) und Zeilenvorschub (0AH) eingegeben (Eingang).
Zeichensuche (Fortsetzung) ♦ Beispiel 1) Die Zeichen „ABCDEF“ und die Bilder gleichzeitig an der Kameranummer IN 5 aufzeichnen. (Wählen Sie für PROTOKOLLE die Einstellung „CR“ auf dem RS-232C-Einstellungsbildschirm.) Die folgenden beiden Schritte sind für die Aufzeichnung von Zeichen notwendig: 1 Geben Sie das Zeichen (oder die Zeichenfolge), die aufgezeichnet werden soll, ein; 2 Zeichnen Sie die eingegebenen Zeichen auf.
