Specifications

St. David Catholic School Manning Architects
Gym and Classroom Replacement N10.024.00
New Orleans, Louisiana July 20, 2012
VIDEO SURVEILLANCE 16760 -10
2. Verify operation of auto-iris lenses. Set back-focus of fixed focal length lenses. At focus
set to infinity, simulate nighttime lighting conditions by using a dark glass filter of a
density that produces a clear image. Adjust until image is in focus with and without the
filter.
3. Set back-focus of zoom lenses. At focus set to infinity, simulate nighttime lighting
conditions by using a dark glass filter of a density that produces a clear image.
Additionally, set zoom to full wide angle and aim camera at an object 50 to 75 feet away.
4. Adjust until image is in focus from full wide angle to full telephoto, with the filter in
place.
5. Set and name all preset positions; consult Owner's personnel.
6. Set sensitivity of motion detection.
7. Connect and verify responses to alarms.
8. Verify operation of control-station equipment.
D. Test Schedule: Schedule tests after pretesting has been successfully completed and system
has been in normal functional operation for at least 14 days. Provide a minimum of 10 days'
notice of test schedule.
E. Operational Tests: Perform operational system tests to verify that system complies with
Specifications. Include all modes of system operation. Test equipment for proper operation
in all functional modes.
F. Remove and replace malfunctioning items and retest as specified above.
G. Record test results for each piece of equipment.
H. Retest: Correct deficiencies identified by tests and observations and retest until specified
requirements are met.
3.4 ADJUSTING
A. Occupancy Adjustments: When requested within 12 months of date of Substantial
Completion, provide on-site assistance in adjusting system to suit actual occupied conditions
and to optimize performance of the installed equipment. Tasks shall include, but are not
limited to, the following:
1. Check cable connections.
2. Check proper operation of cameras and lenses. Verify operation of auto-iris lenses and
adjust back-focus as needed.
3. Adjust all preset positions; consult Owner's personnel.
4. Recommend changes to cameras, lenses, and associated equipment to improve Owner's
utilization of video surveillance system.
5. Provide a written report of adjustments and recommendations.
3.5 CLEANING