Specifications

St. David Catholic School Manning Architects
Gym and Classroom Replacement N10.024.00
New Orleans, Louisiana July 20, 2012
PA/INTERCOM SYSTEM 16750 -7
2.42 Gymnasium Sound System
A. Speakers: Octasound SP820A, omni-directional, 200W RMS, 400W peak, or approved
equal.
B. Speaker Jacks: STX chassis connectors, metal body, soldered connection.
C. Speaker Cable: STX cable connectors, metal body, #12 AWG stranded copper hard
usage cable, minimum 12 feet. Provide 2 sets, 1 primary for left and right cahnnels, and
1 spare set.
D. Mixer: Crown 28M or approved equal.
E. CD Player: Tascam CD-200i with ipod docking station, or approved equal.
F. Amplifier: Crown XTi 1000 or approved equal, maximum 275W per channel.
G. Wired cardiod microphone: Bogen HDU150 or approved equal, cardiod pickup pattern,
quantity 4.
H. Wired omni microphone: Bogen HDO100 or approved equal, omni-direction pickup
pattern, quantity 4.
I. Wired desktop microphone: Bogen MBS1000A or approved equal, cardiod pickup
pattern, quantity 2.
J. Wireless microphone: Bogen UDMS800HH handheld microphone and receiver, or
approved equal, quantity 1.
K. Mobile cart: Bretford Basics TC15SA or approved equal. Unit shall be welded
construction, lower cabinet has 19” rack-mount rails with locking doors front and back,
and upper pull-out shelf. Provide rack-mount utility drawer in lower cabinet.
PART 3 – EXECUTION
3.1 INSTALLATION
3.1.1 Complete system shall be installed in strict accordance with the recommendation of
the manufacturers as approved by the Architect, anchoring all components firmly
into position or long life under hard use.
3.1.2 System equipment locations shown on the Drawings are approximate. Verify exact
location s in the field and coordinate these with the Architect.
3.1.3 After the systems have been completely tested, the cables between the sound system
equipment cabinet conduit access boxes and the sound system equipment cabinets
shall be neatly bundled and held with either nylon lacing cord or nylon cable
clamping devices similar to Thomas & Betts "Ty-Rap". More than one bundle may
be used if one bundle would be too large to be workable. Provide sufficient loop in
the bundle to allow moving the equipment cabinets away from the wall for servicing.
Cable bundle(s) shall be securely attached to the equipment.
3.2 INSPECTION AND TEST UPON COMPLETION