Specifications

93/94
７． Appendix
7.1 Restrictions
• • Functions supported by this software depend on the type of your Mitsubishi digital recorder.
For models supported by this software, refer to the section of “Compatible digital recorders” in
this manual.
• • If an operation problem should occur and you can’t locate the cause of such problem in
Mitsubishi digital recorder or this software, other component equipment, cables, application
software, or operation system, then diagnose the problem by directly connecting Mitsubishi
digital recorder to the personal computer containing this software and the specified operation
system using the specified devices (or equivalents thereof unless use of such equivalents is
questionable).
• • The image refresh speed of this software depends on the CPU performance of your personal
computer and playback devices to be used. (The image refresh speed is affected by the network
load during communication.) Therefore, the playback speed of this software may be inconsistent
with the recording interval of the digital recorder.
• • Media containing recorded data out of sequence may not be played back properly.
• • The search functions may not work correctly depending on the recording condition of the
searched media.
• • Images or characters may not be printed correctly depending on the printer or printer driver to
be used.
• • This software occupies a large amount of memory to display or develop a lot of images. Don’t
run this software with other application programs at the same time.
• • The picture quality reproduced by this software depends on the picture quality settings applied
at the time of recording by the digital recorder, except when image sizes other than 100% are
selected.
• • When the digital recorder is used in combination with other network device on the network
containing this software, this software may not able to perform as specified. In such cases,
divide the network.
• • While any of the menu screens or on-screen display items of the digital recorder is being
displayed on the monitor, you can’t load data from the digital recorder correctly. When loading
data, keep the menu screens and on-screen display items off.
• • Some items on the menu screens of the digital recorder can’t be disabled via network.
• • If it takes longer than 30 seconds for the digital recorder to search for an image internally via
network, such image may not be loaded.
• • If the data loading process via network is unstable, decrease the data transfer speed using the