Specifications

86/94
6.3.1 Playing back audio data
You can play back audio data contained in the copied data using the following procedure.
【Not Synchro. playback】
Put a checkmark to [Output] on the FSMPlayer panel and select a playback channel from the
drop-down menu. Then select [Not Synchro.] in the [Playback] field. Play back the copied data and
stop at a point where you want to hear the audio. The audio data around the stop point are played back.
You can change the duration of audio playback in 3 levels using the slide bar on the right side. The
actual duration of audio playback varies depending on the frame rate of the recorded image. Adjust the
duration for every data to be played back.
【Synchro. playback】 (Applicable only to some models)
Select [Synchro.] in the [Playback] field. You can play back simultaneously the audio and image of the
data downloaded in blocks via network or the data copied together with audio by a recorder. Only one
playback channel is displayed in this case. Audio will not be played back during other than normal
playback (such as fast-forward playback and reverse playback). The [LipSync] slide bar should be
adjusted according to the PC to be used and the recording status of data to be played back. In some
cases, there may not be found an optimum position where the image and audio synchronize with each
other.
Notice
z • Some items are not displayed or operated depending on the type of recorder used for recording.
z • In Synchro. audio playback, the frequency of image refreshing is reduced depending on the
processing power of PC. When you want to playback giving priority to image, select [Not synchro.].
z • The settings on this panel remain intact for the next startup.
z • Audio playback channel and image display channel are not related. You can play back them in any
combination.
z • When data are played directly from a drive that is slow to read CD and DVD, audio may be output
intermittently. Play back data after copying it to a HDD.