Specifications

26/94
Group name:
Use the dropdown menu to switch the
group name.
3.3.3 Camera list
On the camera list, the statuses of the currently displayed cameras are displayed. For the
camera list, there are two display modes: the “all cameras” display mode and the “grouping”
display mode. Use the radio buttons above the camera list to switch the display mode.
In the “all cameras” display mode, the currently connected recorders and all the registered
cameras of the currently connected recorders will be displayed using the tree structure. If a
camera name is displayed in gray, the camera is not currently displayed on the screen.
In the “grouping” display mode, the currently displayed cameras only will be displayed.
Drag a camera name from the camera list, and then drop it in the Camera window to display
the camera in the Camera window.
“All cameras” display “Grouping” display mode