Specifications

11/94
Depending on the current screen or operation condition, some of the buttons displayed on the
screens may not be valid. These invalid buttons are dimmed and cannot be clicked.
Most of the buttons necessary for operation are icons. When you position the mouse pointer
on one of these icon buttons, the name of the button and some sentences will appear to
describe the function of the button, or to describe why the button is invalid. If it is not
necessary to display these sentences, change the condition set in the “Control Description”
area while referring to Sec. 4.7.1 “General”. Note that these sentences appear on the
uppermost window and panel only.
3.1. DX-PC200 login screen
Select “DX-PC200” from the start menu. When the DX-PC200 is activated, the Application
Login screen will appear as shown in the following figure. This screen is the login screen for
the DX-PC200, and differs from the login screen for each recorder. For the user name
registered on this login screen, the DX-PC200 will store various settings (Sec. 4.9 Grouping
function, etc.) in the memory. In addition, functions will be restricted for each user registered
on this login screen (Sec. 4.7.1 User function restriction).
Enter the user name and the password, and then click the
button to log in the DX-PC200.