Operating instructions

Other operations

Before operating, set the operational mode of this unit to the mode shown on the right of

each function. (Refer to page 9 for setting the operational mode.)

Selecting the recorder to be operated

Recorder operational mode

1 Press the DVR No. button.

2 Press the number button (1 to 16) corresponding to the ID number of the recorder to be

operated.

Recording

Recorder operational mode

When the EMERGENCY button is pressed, the emergency recording starts.

Lock

Recorder operational mode

• When the LOCK button is pressed, the lock function of this unit is turned on.

Registering the bookmark

Recorder operational mode

When the BOOK MARK button is pressed during the still frame playback of the single screen, the

selection screen is displayed and the bookmark can be registered.

• The following buttons are used to set the menu.

– SPLIT SCREEN buttons : Used to operate the buttons on the menu screen which are

shown with the alphabets A to E.

– 1 to 16 buttons : Used to operate the buttons on the menu screen which are

shown with the figures 1 to 16.

ALARM OUT button

Recorder operational mode

When the ALARM OUT button is pressed, the MODE OUT terminal on the digital recorder of which

“Mode Out Settings” is set to “LAN” is activated. By using this button, you can remotely control the

device connected to the MODE OUT terminal of the digital recorder.

Checking the connected recorders

Recorder connection check mode

• When this unit is switched to recorder connection check mode, the number buttons (1 to 16)

corresponding to the connected recorder numbers are illuminated, and you can check the

digital recorders which are currently connected.

Recorder sequential display

Recorder sequential display mode

• When this unit is switched to recorder sequential display mode, the recorder of which picture is

displayed switches sequentially at the interval of specified switching time (default setting is 5

seconds).

• When the SEQUENTIAL TIME +, – button is pressed, the switching time is changed between

the range of 2 to 60 seconds.

• When the DVR No. button is pressed, the mode of this unit is resumed to the recorder

operational mode.