Specifications

computer’s graphics adaptor is replaced.

If you are still not satisfied with the result, you can enhance the image by using

the monitor’s manual adjustment functions.

Manual Picture Adjustment

Adjustments to the displayed image and audio volume are made using the

On-Screen Display (OSD), and the buttons on the front of the monitor.

To manually adjust the image:

1. Display your operating system desktop

2. Open the OSD menu by pressing one of the Function keys on the monitor.

3. Press Fn+ or Fn- to select the Clock function.

4. Press + or - to increase or decrease the sampling clock to get the optimum

picture. Look closely at the picture displayed, especially surrounding text

and icons, for any movement or change. Adjust the Clock setting and see

how this affects this “noise” or movement. Make sure that in correcting

noise in one part of the screen the setting does not create it in another.

You should, with careful adjustment, be able to obtain a picture with no

visible noise in any section of the screen.

5. If some noise or distortion is still visible select Phase using the Fn+ or Fn-

buttons.

6. With the Clock set to the optimal value adjust the Phase to further optimise

the displayed image. You should now be able, with a combination of the

Phase and Clock settings, to obtain a perfectly stable image.

7. Finalise the manual adjustment using the H. Position and V. Position

functions

If you are still not satisfied with the result, try repeating the above procedure

using a graphics signal that has a different refresh rate.