Service manual

- 16 -

* How to change the EDID (Serial No. etc.)

1. Operate adjustment Program

2. Select EDID INFO of the EDID Menu for Analog EDID and DDC INFO for Digital EDID.

3. First. You can see the blank screen, and press "Enter" key and you can see the EDID Contents

4. Choose the Data to be changed, and press "Enter" Key.

5. After changing the Data, Press "Enter"

If more and more to be changed, go back to 4 and repeat.

6. To save and end the changed, press "F10" Key

Not to do that, Press "Esc"

- Information of S/No on the EDID-

Find character string "00 00 00 FF 00" on EDID Data.

From next string of the above to "0A" is S/No.

Here, you should take care of this S/No composed by "ASCII Code"

FYI,

30H equals to 0, 31H equals to 1, … 39H equals to 9.

More information, refer to ASCII Code Table.

<< LCD IIC ADJUST. PROGRAM :LCD185~1. DAT >>

MENU Move : Arrow or Space Quit : ESCMENU Select : Enter

COLOR ADJ COMMAND EDIT EEPROM QUITDIST. ADJ

MODEL SAVE

MODEL SEL.

EDID INFO

DDC INFO

<< LCD IIC ADJUST. PROGRAM :LCD185~1. DAT >>

Don’t save & Exit : Esc key Edit : Enter key Save & Exit : F10 key

COLOR ADJ COMMAND EDIT EEPROM QUITDIST. ADJ

EDID

"32 30 36 30 30 30 30 30 31" shows S/No.

By changed ASCII Code, S/No equals 20600001.