Service manual

- 15 -
8) Select PRESET EXIT command and Enter.
3-4. Adjustment for EDID
Use this procedure only when there is some problem on EDID data.
1) Connect the D-sub cable.(For Analog EDID)
2) Select EEPROM → EDID<A> WR command and Enter.
3) Connect the DVI to D-sub cable.(For Digital EDID)
4) Select EEPROM → EDID<D> WR command and Enter.
<< LCD IIC ADJUST. PROGRAM :LCD185~1. DAT >>
MENU Move : Arrow or Space Quit : ESCMENU Select : Enter
COLOR ADJ COMMAND EDIT EEPROM QUITDIST. ADJ
PRESET START
PRESET EXIT
<< LCD IIC ADJUST. PROGRAM :LCD185~1. DAT >>
MENU Move : Arrow or Space Quit : ESCMENU Select : Enter
COLOR ADJ COMMAND EDIT EEPROM QUITDIST. ADJ
ALL Init.
EDID(A) WR
EDID(D) WR
EDID Read
EEPROM Read
<< LCD IIC ADJUST. PROGRAM :LCD185~1. DAT >>
MENU Move : Arrow or Space Quit : ESCMENU Select : Enter
COLOR ADJ COMMAND EDIT EEPROM QUITDIST. ADJ
ALL Init.
EDID(A) WR
EDID(D) WR
EDID Read
EEPROM Read