User manual

● PRODUCT

1. Do not cover or block the ventilation holes in the back of the monitor case.

2. Do not insert any metal objects into the ventilation holes of the monitor case

and be careful not to spill liquids over this product as this could result in severe

injury.

3. Unplug the monitor’s power cable if it’s not to be used for a long period of time.

4. Do not attempt to dismantle this product. Any attempt to dismantle or remove

the covers from this product will invalidate the warranty and may also result in

serious injury.

5. Do not touch the screen directly with fingers. The oils from your skin may leave

marks on the surface of the screen, which are difficult to be removed and may

damage the screen permanently.

6. Do not apply pressure to the LCD screen. The LCD panel is a very delicate

and fragile component.

7. AC Adapter holder can be dismounted when not in use.

8. When a standard base is not used, for safety concern, please use the M4

screws with flat washers and spring washers provided, length between 8 ~

10mm.

9. If enclosed standard base is not to be used, any base assembled to the

monitor should meet VESA 100 x 100mm standards.

● MAINS PLUG (2Pin / 3Pin)

1. Do not remove the grounding or earth connection from the power supply /

mains plug.

2. Always remember to unplug the LCD Monitor from the power supply under the

following circumstances:

 If the monitor will not be used for a long period of time.

 If the power supply cable or plug / connector is damaged.

(Please refer to the “User Manual “when connecting and disconnecting the LCD

Monitor from any power supply or other systems and before making any

adjustments to the Monitor. In the event of any unexpected situation occurring

whilst operating the Monitor please switch off the power supply and remove the

power cable. If the problem is not explained in the User Manual, please contact

your local dealer or our customer service department.)

 If the monitor housing is damaged or broken.