User manual

15
CHAPTER 3 SIGNAL CONNECTOR AND INSTRUCTION
Input / Output Interface
1. DC In
2. DC Out: DC 12V / MAX. 1A.
3. VGA In
4. VIDEO In / Out
(BNC-TYPE)
5. Y/C In / Out
(4-Pin mini-Din) S-Video
6. Audio In / Out (RCA Jack)
If you choose a video input without connecting any video signal, “No Signal" will
be displayed onto the screen. If a video cable is disconnected while the display
is being used, “Video Loss " will be displayed onto the screen.
Note:
※ It takes about 2 ~ 3 seconds to switch between modes.
※ When Mode is changed, the monitor will show a blue screen, then display
the selected input or display " NO Signal ".