AUTO-SCANNING WITH DIGITAL CONTROL COLOR DISPLAY MONITOR Model NFF8705STTKW USER’S GUIDE For future reference, record the serial number of your display monitor in the space below: SERIAL No. The serial number is located on the rear cover of the monitor. Internet Home Page: http://www.mitsubishi-display.com/ Supplying Windows 95/98 INF File download service, new products information, etc.
- ii -
As an ENERGY STAR Partner, Mitsubishi Electric Corp. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. RADIO INTERFERENCE REGULATIONS STATEMENT FOR U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
In and after the middle of this page, you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development Unit S-114 94 Stockholm Sweden Fax: +46 8 782 92 07 E-mail (Internet): development @tco.se Current information regarding TCO’95 approved and labelled products may also be obtained via the Internet, using the address: http//www.tco-info.
CONTENTS 1. INTRODUCTION ................................................... 2 CAUTION 1.1 Features ...................................................... 2 The power cord provided with this monitor is designed for safety and must be used with a properly grounded outlet to avoid possible electrical shock. 1.3 Power Management Function ..................... 3 1.2 Internal Preset Memory Capability .............. 3 1.4 DDC ............................................................ 3 1.
1 INTRODUCTION Congratulations on your purchase of the high resolution color monitor. We designed this monitor to provide you with years of reliable trouble-free operation. This guide tells you how to connect, adjust and care for your monitor. This guide also provides technical specifications and instructions for troubleshooting any basic problems you may experience with your monitor. 1.
1.2 Internal Preset Memory Capability 1.5 To minimize adjustment needs, the factory has preset popular display standards into the monitor, as shown in Table 1. If any of these display standards are detected by the microprocessor, the picture size and position are automatically adjusted. All of the factory presets may be overwritten by adjusting the user controls. The monitor is capable of automatically storing up to 6 additional display standards.
1.7 Unpacking 1.9 Quick Operation Chart After you unpack the box you should have all of the items indicated in Figure 1. Save the box and packing materials in case you transport the monitor. 2 1 To summarize the steps in connecting your computer with the color monitor and setting the necessary controls and switches, refer to the chart below. 3 Connect the color monitor and computer with the necessary cords and cables. See Section 3. INSTALLATION AND CONNECTION 5 4 Turn on the color monitor.
2 PART NAME 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. REAR FRONT Figure 3 2.2 Figure 4 Function 7. AC POWER CONNECTOR 1. POWER SWITCH: A push-on / push-off switch for AC power. 8. SIGNAL CABLE 2. POWER-ON INDICATOR: This indicator illuminates green when AC power is on, and illuminates red when the monitor is in the power management modes. 9.
3 INSTALLATION AND CONNECTION On the back of the monitor two kinds of connections are provided: AC power connector for the AC input and DB915P connector for video signal input. 3.2.2 Connecting to An Apple Macintosh Computer 3.1 1. 2. Figure 6 shows the signal cable and AD-A205 Adapter(option) to the video port in an Apple Macintosh. AC Power Connection One end of the AC power cord is connected to the AC power connector on the back of the monitor.
4 OSD (On Screen Display) FUNCTIONS 4.1 (4) Select the item icon on the Sub Menu row by pressing button. Sub Menu How to adjust the screen The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen with using the OSD function. NOTE When pressing both and buttons simultaneously, item selection moves to the reverse. (1) Turn on the monitor. (2) Press button to display the OSD. (5) Adjust by pressing or button.
Group Icon Item Icon Item CONTRAST BRIGHT Press the Minus Button Press the Plus Button To decrease the contrast. To increase the contrast. To decrease the brightness. To increase the brightness. SCREEN COLOR TEMPERATURE HORIZ-SIZE When FPM is on, the color temperature is fixed to 9300K and it is not adjustable. To narrow the width of the image To expand the width of the image on the screen. on the screen. To move the image to the left. To move the image to the right.
5 TROUBLESHOOTING Before calling your Authorized Product Support, please check that the items below are properly connected or set. In case of using a non-standard signal, please check the pin assignments and the signal timing of your computer with the specification outlined in 6. SPECIFICATIONS. PROBLEM LED On (Green) LED Off No picture ITEMS TO CHECK • Contrast and brightness controls. • Power switch. • AC power cord disconnected.
ITEMS TO CHECK PROBLEM Two fine horizontal lines are visible on the screen. LOCATION • The 2 very faint thin lines across the screen are normal. They are caused by the aperture grille stabilization filaments(Damper Wires) which are required for all aperture grille CRTs’. • – Aperture Grille Shadow of Damper Wires Electron Gun Damper Wires Shadow of Damper Wires A buzzing sound when power on. Aperture Grille Type • A brief vibration or hum sound that is heard just after power up is normal.
6 SPECIFICATIONS Size CRT 45cm/17"(41cm/16" Diagonal Viewable Image) Mask type Aperture grille Gun In-line Deflection angle 90° Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.25mm Face Plate Anti-glare, Anti-reflection and Anti-static coating Focusing method Video Dynamic Beam Forming (DBF) 0.7 or 1.0Vp-p analog RGB Sync Input Connector Separated H, V sync. or Composite sync DB9 - 15P SCANNING Input Impedance Horizontal 75Ω(video), 1kΩ(sync.
7 7 .1 APPENDIX (1) (2) Optional Macintosh Adapter AD-A205 Settings The AD-A205 Macintosh Adapter(Option) allows you to take an advantage of the built in video capabilities of your Macintosh computer with the monitor. Set the dip switches of the adapter, before connect to the computer. Set the dip switches according to the following chart. By using the following chart, you can choose a main resolution, quickly.
CP871C156A10 MITSUBISHI ELECTRIC CORPORATION HEAD OFFICE: MITSUBISHI DENKI BLD, MARUNOUCHI, TOKYO 100-8310 TELEX J24532 CABLE MELCO TOKYO http://www.mitsubishi-display.
