Instruction manual

PARAMETER DEFINITIONS
22
5.6 Input/Output Terminal Assignment
5.7 Operation When an Alarm Occurs
The following table shows the behavior of the inverter and network when
an alarm occurs:
*1 Depends on the type of communication fault.
*2 For example, E.OP3, E.OC3.
*3 For example, Slow blinking LED
Input/output terminal assignment functions depend upon
programmed functions such as brake sequences
Fault Type Item Net Ext PU
Inverter (*2)
Inverter
Operation
Stop Stop Stop
Network Comm. Continue Continue Continue
Modbus Plus
Comm. (*3)
Inverter
Operation
Stop Continue Continue
Network Comm Continue (*1) Continue (*1) Continue (*1)
CAUTION