Instruction manual

OPERATION

3.3 Functions Available in the Operating Modes

The functions available to the drive depend on the operating mode.

The following table indicates the command types available according to

the operating mode.

*1 Depends on the value of Pr. 338 and Pr. 339.

*2 Depends on the value set in Pr. 77.

Refer to the Inverter Instruction Manual for further information.

*3 If a network communication error has occurred, a manual resewill be required.

Control Type Command Type Net Ext PU

Modbus Plus

Operating

Command

Yes(*1) No No

Output

Frequency

Setting

Yes(*1) No No

Monitor Yes Yes Yes

Parameter Write Yes(*2) No(*2) No(*2)

Parameter Read Yes Yes Yes

Inverter Reset Yes(*3) No No

External

Term in als