User`s manual
3-14
3.5 Mounting with screws
INP-TN5A0202-E
3.5
Mounting with screws
When mounting modules with screws on the wall, check for the base parts of it beforehand.
Mounting screws are not included the product. If necessary, prepare two screws (M3) per unit.
1. Refer to the right fi gure for mounting screw hole size and
the pitch, to decide the mounting position.
2. Remove the module main unit from the base part.
[3.3Mounting modules]
3-8
3. Connect the base parts and push the all locking tabs up
to fi x.
4. Fixate the base parts onto the mounting position with
screws.
5. Fixate the base parts onto the mounting position with
screws.
PointPoint
(30)
9
0.2
88.5 0.2
(100)
(3)
30
+0.7
+0.2
2-M3
Unit [mm]
(30)
9
0.2
88.5 0.2
(100)
(3)
30
+0.7
+0.2
2-M3
Unit [mm]