User`s manual

3-9
3.3 Mounting Modules
INP-TN5A0202-E
How to detach the base part
1. Press the Lock lever on the top of the main unit.
ࡌ࡯ࠬㇱ
Main unit
Base part
Projection
Main unit
Lock lever
2. Pull down the main unit.
3. Remove the cutout at the lower end of the main unit from
the projection on the base part.
Attaching the base part to the main unit takes a reverse
procedure to detaching the base part from the main unit.
Make sure the locking lever on the main unit is tted into
the base part when attaching is completed.
PointPoint