User`s manual

3-8
3.3 Mounting Modules
INP-TN5A0202-E
3.3
Mounting Modules
How to attach/detach the front terminal block/the base part from the main unit
Each module of Multi-Loop Module Type Temperature Controller, PUM series, has the confi guration that both the front terminal
block and the base part are detachable through one-touch operation for easy installation and maintenance.
How to detach the front terminal
1. Press the lock lever on the top of the main unit.
Lock lever
Front terminal block
Main unit
Projection
Main unit
2. Pull down the front terminal block.
3. Detach the cutout at the lower end of the front terminal
block from the projection on the main unit.
Attaching the main unit to the base part takes the reverse
procedure to removing the main unit from the base part.
Make sure the locking lever on the main unit is fi tted into
the base part when attaching is completed.
●
●
PointPoint