User`s manual

6-6

6.4 Setting Loader Communication Parameters

INP-TN5A0202-E

6.4

Setting Loader Communication

Parameters

In order to perform communication between the master and the equipment properly, the setting below is necessary.

All communication conditions settings for both of the master and the equipment should be the same.

Setting items for loader interface (The equipment)

Items Setting range Factory-set value Remarks column

Station No. 128 128

The value is ﬁ xed regardless of the

setting of St. No. conﬁ guration SW.

Communication speed setting 19.2kbps (Fixed) ― Not changeable

Data length 8 bits ― Not changeable

Parity None ― Not changeable

•