User`s manual

1-8
1.3 Part Names and Functions
INP-TN5A0202-E
Main part (Back face)
1 2 3 4 5 6
%QOOWPKECVKQP
DGJCXKQTUGVVKPI
10
Communication behavior confi guration Switch
Communication behavior is set by DIP switch (SW1 to SW6) on the back face of the module.
Communication
behavior
SW setting
1(Note 1) 2(Note 1) 3 4 5 6
RS-232C OFF OFF OFF OFF OFF
(Note 2)RS-422 ON OFF OFF OFF OFF
RS-485 OFF ON OFF OFF OFF
(Note 1): Turning SW1 and SW2 ON at the same time is not possible.
(Note 2): If turning the SW6 ON, communication setting operates with the factory-set value.
Factory-set value of the communication setting is as follows.
Parameter Set value Remarks column
Communication speed 115.2kbps PLC communication speed setting
5-11
Data bit 8
PLC transmission setting
5-12
Parity EVEN
Stop bit 1