User`s manual

5-24 INP-TN5A0202-E
5.5 Address Map and Data Format
Memory confi guration (Monitor area)
Contents Reading out/Writing data setting range Factory-set
value
Register No.
Monitor area device type 00A8h: Data register (D)
00B4h: Link register (W)
00AFn: File register (R)
00B0h: File register [for sequence No. access] (ZR)
00A8h 40015
Monitor area start address (lower) Addressable range: according to PLC setting 0 40016
Monitor area start address (upper) Addressable range: according to PLC setting 0 40017
Monitor area device size 0 to 712 0 40018
Monitor area entry St. No.
(The 1
st
word)
0 : Not used
1 to 16 : Control/Analog module
17 to 32 : Event module
128 : Programless communication module
0 43001
Monitor area entry register No.
(The 1
st
word)
0,30000 to 49999 (Note2) 0 43002
Monitor area entry St. No.
(The 2
nd
word)
0 : Not used
1 to 16 : Control/Analog module
17 to 32 : Event module
128 : Programless communication module
0 43003
Monitor area entry register No.
(The 2
nd
word)
0,30000 to 49999 (Note2) 0 43004
.
.
.
Monitor area entry St. No.
(The 711
th
word)
0 : Not used
1 to 16 : Control/Analog module
17 to 32 : Event module
128 : Programless communication module
0 44421
Monitor area entry register No.
(The 711
th
word)
0,30000 to 49999 (Note2) 0 44422
Monitor area entry St. No.
(The 712
th
word)
0 : Not used
1 to 16 : Control/Analog module
17 to 32 : Event module
128 : Programless communication module
0 44423
Monitor area entry register No.
(The 712
th
word)
0,30000 to 49999 (Note2) 0 44424
Note 2: Only the address written in the “Setting/Monitor area register No.” (Control module
5-51
, Event module
5-64
, Analog module
5-71
) is settable. However, the parameter marked “*” in the “Entry ban” column
cannot be set.