User manual

3 PLC Communication
98 © Copyright Reserved Autonics Co., Ltd.
4th Touch protocol display item to set ‘PRINTER’ as following figure.
Protocol display rotates in order as EDITOR→PRINTER→BARCODE→MONITOR
with touching.
5th Designate connect port for communicating GP/LP and printer. Connect port display
rotates in order as RS422↔RS232C with touching.
6th Synchronize communicate specifications (baudrate, data bit, stop bit, parity, flow
control) of between GP/LP and printer.
Touch ‘CH2’ and detailed configuration screen is switched. Designate detailed
configuration.
7th After completing communication configuration, you should exit system setting menu
and switch user screen to communicate GP Editor.
Touch ‘Menu’, current setting values are saved and it returns to previous menu.
Touch ‘Exit’, current setting values are saved and it returns to user