User manual

3 PLC Communication

4th To communicate between GP/LP and LS MASTER K200 for CH1, MITSUBISHI

FX2N for CH2, desigante the connect port for the specific PLC and use the dedicated

cable. (Refer to ‘4 Communication Cable By Device’)

In case of LS MASTER K200 of CH1, it uses CPU module RS232 port. In case of

MITSUBISHI FX2N for CH2, it uses CPU module RS232 and RS232/422 converter

should be used. If two of RS232C serial interface type, connect each RS232C A, or

RS232C B port.