User manual

3 PLC Communication
74 © Copyright Reserved Autonics Co., Ltd.
5th Synchronize the station of between GP/LP and CT6M-2P. The station of CH1 is
available to set from GP/LP. CH2 is set from link device of GP Editor. (Refer to ‘1.4
Link device’.) Enter the same station of CT6M-2P.
For more details, refer to ‘GP Editor user manual’.
6th Synchronize communicate specifications (baudrate, data bit, stop bit, parity, flow
control) of between GP/LP and CT6M-2P. The communicate specification of
downloaded PLC to GP/LP is set as default of the connected PLC and
communication is available directly. (Only when the communicate specification of
connected PLC is set as default)
Touch ‘CH2’ and detailed configuration screen is switched. Designate detailed
configuration.
7th After completing communication configuration, you should exit system setting menu
and switch user screen to communicate GP Editor with CT6M-2P.
Touch ‘Menu’, current setting values are saved and it returns to previous menu.
Touch ‘Exit’, current setting values are saved and it returns to user