User manual

2 GP Editor Data Download
46 © Copyright Reserved Autonics Co., Ltd.
5th If it is not configured as ‘RS232C’ for CH2 connect port even though ‘EDITOR’ for
CH2 protocol is configured, touch connect port display item to set ‘RS232C’ as
following figure.
Connect port display rotates in order as RS422↔RS232C with touching.
6th After completing communication configuration, you should exit system setting menu
and switch user screen to communicate GP Editor.
Touch ‘Menu’, current setting values are saved and it returns to previous menu.
Touch ‘Exit’, current setting values are saved and it returns to user screen.