User manual

2 GP Editor Data Download
42 © Copyright Reserved Autonics Co., Ltd.
2.2 Communication configuration
There are two configurations to transmitting data. First is GP Editor configuration, and second is
GP, LP configuration.
2.2.1 GP Editor configuration
This manual describes basic communication configuraion of GP Editor and serial communication.
For more details, refer to ‘GP Editor user manual’.
Through GP Editor which is dedicated drawn software, you can download the data to GP/LP.
To download data editing in GP Editor to PLC, you should designate as following.
1st Install GP Editor and opeate this program.
2nd ‘Project Select’ dialog appears. Select ‘New’ to create a new project.
3rd ‘GP/PLC Type’ dialog box appears. Designate CH1 group and type, CH2 group and
type and click ‘OK’.
No Item Description
① GP/LP Type Designate GP/LP model type by pull-down menu.
② CH1 Group Designate PLC group of CH1 by pull-down menu.
③ CH1 Type
Designate PLC type of CH1 for ② by pull-down menu.
④
CH2 Group Designate PLC group of CH2 by pull-down menu.
⑤
CH2 Type
Designate PLC type of CH2 for ④ by pull-down menu.