User manual

1 Product Overview
© Copyright Reserved Autonics Co., Ltd. 33
 CH1 GP connect device: UW(30)
 Link device setting
 Start Device: K(0), Bit/Word: Word, Numbers: 5, Read/Write: Write
 Start Device: M(0), Bit/Word: Word, Numbers: 3, Read/Write: Read
 Start Device: P(10), Bit/Word: Bit, Numbers: 20, Read/Write: Read
 Device: D(10), Bit/Word: Word, Numbers: 6, Read/Write: Write
GP/LP
Communicat
ion
direction
CH1
Inner link device
(Word)
Numbers Device Numbers
UW(30) to UW(34) 5
(Write) →
K(0) to K(4) Word 5
UW(35) to UW(37) 3
(Write) →
M(0) to M(2) Word 3
UW(38) 1
(Read) ←
P(10) to P(13) Bit 4
UW(39) to UW(44) 6
(Write) →
D(10) to D(15) Word 6
※ If numbers is set over than usable numbers, maximum range numbers is used.
CH2 device is monitored indirectly with linked GP device. CH2 link device setting is same as
CH1 data link and is able to connect multi devices and to set several stations. In this case, UW(i)
is GP i
st
device, N_Dk(i) is that station is N, and i
st
of D1 CH2 device.
 CH2 inner link device: D(i)
 Set for station and inner device