User manual

1 Product Overview
© Copyright Reserved Autonics Co., Ltd. 31
GP/LP
CH2
station
Communication
direction
CH2 PLC
GP/LP series
※1
FX-2N
UW300 to UW309 -
(Read) ←
D0 to D9
UW310 to UW319 -
(Read) ←
D10 to D19
UW320 to UW329 -
(Read) ←
D20 to D29
UW330 to UW334 -
(Write) →
D30 to D34
UW335 to UW339 -
(Write) →
D35 to D39
※1. Mono type(GP-S044, GP-S057, LP-S044) ) is able to communicate 1:1, 1:N for CH2 and
supports multi station selection. If PLC of connected with CH2 does not support station, , it
displays ‘-’ and 1:N communication does not execute.
Color type(GP-S070, LP-S070) is able to communicate 1:1, 1:N for without CH1, CH2
division, and supports multi station selection. If PLC of connected with CH2 does not
support station, it displays ‘-’ and 1:N communication does not execute.
In this case, UW(i) is i
st
GP device, Dk(i) is i
st
CH1 device.
(1) CH1 inner link device: UW(i)
Link device setting
 Start Device: D1(i), Bit/Word: Word, Numbers: A, Read/Write: Write
 Start Device: D2(i), Bit/Word: Word, Numbers: B, Read/Write: Read
 Start Device: D3(i), Bit/Word: Word, Numbers: C, Read/Write: Read
 Start Device: D4(i), Bit/Word: Word, Numbers: D, Read/Write: Read
 Start Device: D5(i), Bit/Word: Word, Numbers: E, Read/Write: Write
Inner link device (Word)
Communication
direction
CH1
Device
First A units of device from UW (i)
(Write) → D1(i) to D1(i+A-1)
B units of device from the next
(Read) ←
D2(i) to D2(i+B-1)
C units of device from the next (Read) ←
D3(i) to D3(i+C-1)
D units of device from the next
(Read) ←
D4(i) to D4(i+D-1)
E units of device from the next
(Write) → D5(i) to D5(i+E-1)