User manual

6 Connectable PLC
290 © Copyright Reserved Autonics Co., Ltd.
6.18.2 Available device
Available deivice of DANFOS FC200 and displayable parameter are as below.
Type Device Mark
Range
Start
End
Bit
Bit device area 0 000001 000065
GP/LP inner bit memory UB UB0 UB6047F
Word
Word device area 4 400001 400990
Word device area 4 401000 401990
Word device area 4 402000 402990
Word device area 4 403000 403990
Word device area 4 404000 404990
Word device area 4 449000 449990
Word device area 4 450000 450000
Word device area 4 450010 450010
Word device area 4 450210 450210
GP/LP inner word memory UW UW0 UW6047
6.18.3 Monitorable device in GP/LP
GP/LP is able to monitor PLC device and change the status.
Enter system setting menu of GP/LP and select [Monitoring]-[Device Monitor]-[DEVICE]. Select
to be monitored device and you can change the status.
The following is avilable device list of this menu, and available range is same as ‘6.16.2
Available device’.
Type Mark Device Note
Bit
0 Bit device area
UB GP/LP inner bit memory
Word
4 Word device area
UW GP/LP inner word memory