User manual

6 Connectable PLC
282 © Copyright Reserved Autonics Co., Ltd.
6.16.3 Monitorable device in GP/LP
GP/LP is able to monitor PLC device and change the status.
Enter system setting menu of GP/LP and select [Monitoring]-[Device Monitor]-[DEVICE]. Select
to be monitored device and you can change the status.
The following is avilable device list of this menu, and available range is same as ‘6.14.2
Available device’.
6.16.3.1 DPU digital power thyristor unit
(1) Modbus
Type Mark Device
Bit UB GP/LP inner bit memory
Word
DP Word device area
UW GP/LP inner word memory
(2) Modbus TYPE A
Type Mark Device
Bit UB GP/LP inner bit memory
Word
3 Word device area
4 Word device area
UW GP/LP inner word memory
6.16.3.2 KRN50 recorder
(1) Modbus
Type Mark Device
Bit
KR Bit device area
UB GP/LP inner bit memory
Word
KR Word device area
UW GP/LP inner word memory
(2) Modbus TYPE A
Type Mark Device
Bit
0 Bit device area
1 Bit device area
UB GP/LP inner bit memory
Word
3 Word device area
4 Word device area
UW GP/LP inner word memory