User manual

1 Product Overview
28 © Copyright Reserved Autonics Co., Ltd.
1.4 Link device
Generally GP/LP monitors directly PLC device of CH1. To link PLC device of CH1 and GP/LP
connect device (by saving monitored PLC device value to specified GP/LP connect device), link
devie menu is needed.
Mono type must use link device with CH2 to communicate 1:N.
Color type is able to monitor directly PLC device of each channel (CH1,CH2). Therefore, color
type does not use link device and is able to communicate 1:N without CH1, CH2 division.
However, PLC which supports station is only able to communicate 1:N.
Select [Common]-[Link Device] of GP Editor menu, ‘Link Device Setting’ dialog box appears.
No Link Device Description
①
GP/LP Type Displays GP/LP model type.
②
CH1 Group Displays CH1 group.
③
CH1 Type Display PLC type of CH1 group.
④
CH1 Inner Link
Device
Designate lead word address of GP/LP for communication with CH1
⑤
CH2 Group Displays CH2 group.
⑥
CH2 Type Displays PLC type of CH2 group.