User manual

6 Connectable PLC

The below table is for communication configuration of recorder KRN50 with GP/LP.

Item

Description

Note

Communication

mode

Modbus RTU

2 Baudrate 9600 bps (Default value of KRN50) Selectable

3 Data type

Data length 8bit Selectable

Parity None Selectable

Stop bit 2bit Selectable

4 Station 0 to 31 Selectable

As above configuration, GP/LP also should be set for the station as below.

(1) KONICS DPU series

1st Enter system setting menu. Touch left-upper point as default position of system

setting menu.

2nd Select [SET ENVIRONMENT]-[PLC SETTING].

3rd Touch CH1 station, station input key pad appears. Enter the same station of the

station which is set from DPU series.

4th Touch ‘ENT’ to save the station and touch ‘Menu’ or ‘Exit’ to exit system setting meun.

5th For recorder KRN50, please designate the configuration as same method.