User manual

6 Connectable PLC
262 © Copyright Reserved Autonics Co., Ltd.
6.15.2 Available device
Device range is different depending on PLC model. Even though same type PLC, there is
difference according to the number of I/O contact point.
UB device is as GP/LP inner bit memory, only in GP/LP it is able to use same as general inner
device of PLC.
It is able to switch into word UW device binding 16 units. However it is related with functional
area and it may cause serious error. Be sure to use only within user area UW30 to UW2047
(when not using recipe, UW30 to UW6047).
For further information of GP/LP inner memory, refer to ‘3.6 System signal’.
Refer to below bit/word available device organization and use the device.
I 00 0
① Device name ② Word address ③ Bit address
Type ① ② ③ Format File No Note
Bit
I Hexadecimal Hexadecimal EESSd 1 Input
O Hexadecimal Hexadecimal EESSd 0 Output
S2 Decimal Hexadecimal EEEd 2 Status
B3 Decimal Hexadecimal EEEd 3 Binary
TD Decimal EEEd 4 Timer.DN
CD Decimal EEEd 5 Counter.DN
UB Decimal Hexadecimal
Word
I Hexadecimal EESS 1 Input
O Hexadecimal EESS 0 Output
S2 Decimal EEE 2 Status
B3 Decimal EEE 3 Binary
TS Decimal EEE 4 Timer.PRE
CS Decimal EEE 5 Counter.PRE
TP Decimal EEE 4 Timer.ACC
CP Decimal EEE 5 Counter.ACC
N7 Decimal EEE 7 INTEGER
UW Decimal
Format
E: Element, S : Sub Element, d : Bit Position
Word I1 = Bit I10 to I1F , Word UW10 = UB100 to UB10F