User manual

6 Connectable PLC
260 © Copyright Reserved Autonics Co., Ltd.
6.14.3 Monitorable device in GP/LP
GP/LP is able to monitor PLC device and change the status.
Enter system setting menu of GP/LP and select [Monitoring]-[Device Monitor]-[DEVICE]. Select
to be monitored device and you can change the status.
The following is avilable device list of this menu, and available range is same as ‘6.12.2
Available device’.
Type
Mark
Device
Note
Bit
I Input relay Read only
Q Output relay Write only
V Inner relay Variable memory
M Auxiliary relay Bit memory
SM Special relay Special memory(Read only)
T Timer contact
C Counter contact
UB GP/LP inner bit memory
Word
IW Input register Read only
QW Output register Write only
VW Inner register Variable memory
MW Auxiliary register Bit memory
SM Special register Special memory(Read only)
T Timer present value
C Counter present value
UW GP/LP inner word memory