User manual

6 Connectable PLC
250 © Copyright Reserved Autonics Co., Ltd.
(2) GP/LP communication configuration
As above configuration, GP/LP also should be set for the station as below.
1st Enter system setting menu. Touch left-upper point as default position of system
setting menu.
2nd Select [SET ENVIRONMENT]-[PLC SETTING].
3rd Touch CH1 station, station input key pad appears. Enter the same station of the
station which is set from E5XX series.
Touch ‘ENT’ to save the station and touch ‘Menu’ or ‘Exit’ to exit system setting meun.