User manual

1 Product Overview
© Copyright Reserved Autonics Co., Ltd. 25
(2) In case of using only CH2 configured in GP Editor
No Item Operation with touching
① Displays CH1 protocol
Rotates in order as NoUse → EDITOR →
PRINTER → BARCODE → UNIVERSAL →
DEFAULT protocol.
②
Displays CH1 connect port
(Designates automatically as
non-using port in ④)
Each of RS422 / RS232C interface type:
RS422 PORT ↔ RS232C PORT
Two ports of RS232C interface type:
RS232C A PORT ↔
RS232C B PORT
③
Displays CH2 protocol
(as downloaded protocol for
default)
Rotates in order as downloaded protocol in GP
Editor → EDITOR → PRINTER → BARCODE
④
Displays CH2 connect port
(Designates automatically as
non-using port in ②)
Each of RS422 / RS232C interface type:
RS422 PORT ↔ RS232C PORT
Two ports of RS232C interface type:
RS232C A PORT ↔
RS232C B PORT
⑤⑥
Communication configuration by
each channel
Moves communication configuration setting
window for selected connected device.
You can designate baudrate, data bit, parity, stop
bit, and flow control for each channel.
If CH1 is as NoUse, it is not able to communication
configuration.