User manual

6 Connectable PLC
© Copyright Reserved Autonics Co., Ltd. 233
(2) When using FPWIN GR
1st After connect the ladder program and PLC, maintain communication status.
2nd Select [Option]-[PLC Configuration] of menu in the ladder software.
3rd ‘PLC Configuration’ dialog box appears. Select ‘COM1 Port’ tab.
4th Select ‘Computer Link’ at the ‘No.412 Comm. Mode’.
5th Select as below at the ‘No.414 Baudrate’ item.
In case PLC is FP0 series, select ‘9600bps’.
In case PLC is FP Sigma series, select ‘19200bps’.
6th Click ‘OK’ and dialog box for downloading appears. Click ‘OK’ and baudrate is
changed.
7th After completing configuration, PLC model should be RUN status once to use COM
Port.