User manual

6 Connectable PLC
232 © Copyright Reserved Autonics Co., Ltd.
6.11.1.2 PLC communication configuration(When using COM Port)
PLC communication configuration is available to set or edit from the dedicated ladder program
(FPSOFT or FPWIN GR).
(1) When using FPSOFT
1st After connect the ladder program and PLC, maintain communication status.
2nd Select [Option]-[PLC Configuration] of menu in the ladder software.
3rd ‘PLC Configuration’ dialog box appears. Select ‘Optional port’ in the left Topics box.
4th Select ‘Computer Link’ at the ‘No.412 Com Port Selection’ item.
5th Select as below at the ‘No.414 Com Port Baudrate’ item.
In case PLC is FP0 series, select ‘1:9600bps’.
In case PLC is FP Sigma series, select ‘0:19200bps’.
6th Click ‘OK’ and dialog box for downloading appears. Click ‘OK’ and baudrate is
changed.
7th After completing configuration, PLC model should be RUN status once to use COM
Port.