User manual

6 Connectable PLC

(2) When using FPWIN GR

1st After connect the ladder program and PLC, maintain communication status.

2nd Select [Option]-[PLC Configuration] of menu in the ladder software.

3rd ‘PLC Configuration’ dialog box appears. Select ‘Tool Port’ tab.

4th Select as below at the ‘No.414 Baudrate Setting’ item.

In case PLC is FP0 series, select ‘9600bps’.

In case PLC is FP Sigma series, select ‘19200bps’.

5th Click ‘OK’ and dialog box for downloading appears. Click ‘OK’ and baudrate is

changed.