User manual

6 Connectable PLC
230 © Copyright Reserved Autonics Co., Ltd.
The below is a diagram and pin arrangement for RS-232C cable.
It is able to connect with GP/LP with Tool Port or COM Port of PLC.
(1) When using Tool Port (Applied cable : (11)C3M5P10-D9F0-M5M0)
(2) When using COM Port (Applied cable : (12)C3M5P11-D9F0-W4*0)
6.11.1.1 PLC communication configuration(When using Tool Port)
PLC communication configuration is available to set or edit from the dedicated ladder program
(FPSOFT or FPWIN GR).
(1) When using FPSOFT
1st After connect the ladder program and PLC, maintain communication status.
2nd Select [Option]-[PLC Configuration] of menu in the ladder software.
3rd ‘PLC Configuration’ dialog box appears. Select ‘Program port’ in the left Topics box.
4th Select as below at the right ‘No.414 RS232 Baudrate’ item.
In case PLC is FP0 series, select ‘1:9600bps’.
In case PLC is FP Sigma series, select ‘1:19200bps’.
5th Click ‘OK’ and dialog box for downloading appears. Click ‘OK’ and baudrate is
changed.